@Vajraang they way that i told you to configure your controller it's the way that we do it before sending the controller.
Before sending any copter we test all the parts, yours should have been configured also, but for some reson it isn't.
Download the apm planner go to the INITIAL/SETUP>RADIO CALIBRATION if the controller works correctly you should be able to see the roll,throttle, pitch and yaw.
- If you move forward and backward the left joystick the Throttle should move
- Right and left of the left joystick should be the Yaw
- Forward and backward of the right joystick the Pitch
- Right and left of the right joystick should be the Roll
Also, check the stick set, it should be on the Mode 2 as I told you.