The roll and pitch are reversed just like written in
I did not understand where to change the settings.
Thanks in advance.
could you please share your hardware configuration? What RC are you using? Is this RC in mode 1 configured?
RC transmitter: Taranis PlusRC receiver: D8R-XP
I don't know the mode of RC. How to check?
A jumper from PPM signal to rightmost signal in Erle Brain.Jumper connecting channel 3 & 4 in receiver.ESCs connected from 1-4 channel of EB3.
Read the RC user manual.
To change the map of your channels here you have the necessary parameters: http://ardupilot.org/copter/docs/parameters.html#rcmap-parameters
Also, you can use these parameters (standard parameters): https://github.com/erlerobot/erle_parameters/blob/master/copter/frambuesa-12-10-2016-TGY-i6.param
Hello @LanderU,I got how to do the settings mentioned in first link mentioned in the problem.
I changed the values mentioned as per the link in Mission Planner to interchange Pitch and Roll controls.The problem was solved.
But could you tell why the problem was solved since I only made a change in Mission Planner i.e. why the change occurred in control also. Mission Planner is only a interface to see parameters that change/occur from the quadcopter.
Is not only to see the what's happen in your vehicle you can also modify the parameters to make more stable your flight.
Here the full parameter list: http://ardupilot.org/copter/docs/parameters.html