Why measure there is I can measure what feeds into that?
Because it's easier. And in case it's a bad cable. Perhaps you're not getting a good connection where you are currently testing. And to determine exactly what power the PFXMini is seeing at that connector. And to double check. But it sounds like you've already determined that this is a bad power module. I was just trying to confirm also.
Okay, ya not trying to be difficult. It was just easier to read there. @LanderU What should I do?
As you have already pointed out, if there is no voltage, then the power module is bad. You need to replace it.
@LanderU I have tried email using the website a few times and also have called the office as well. It there a email I can use to get a hold of someone to refund this broken part?
So you've measured the voltage at the connector also? If you're sure it's bad, just cut the cables anyway.
I bought a new one not through Erle robotics and it works fine. Trying to deal with the ~ 30 dollar defective one.
Ah got it! Thanks for the update.
you can send an email to firstname.lastname@example.org.