I am attempting to calibrate the ESC's. I am able to enter calibration (throttle Full --> power on red blue flash --> power off --> power on --> solid red light). When lowering the throttle and raising it, there is no response from the motors.
radio calibration was successful and status info shows channel input and output changing with stick movements. battery level remains 0V esc volt and current are 0.
ESC beep on start up, I think. Motors twitch as well, so I assume everything is connected properly. I've checked the battery voltage manually and it's 14.3V.
Does the displayed voltage hint at a problem with the configuration. I don't have any external battery monitors.