H, please look:
I cannot see any fault in your config file. If you connect this wire in another place, is this other machine able to obtain the network settings?
What do you mean by "other machine able to obtain the network settings" ?A desktop computer can surf the web with the same ethernet cable.
Great, this is the answer.
Write the following lines in your /etc/network/interfaces and restart the board with the ethernet cable attached:
iface eth0 inet dhcp
Where are my "/etc/network/interfaces " located?Thank you
sudo nano /etc/network/interfaces insert the lines and exit using ctrl + o then press enter button and finally cntrl + x.
sudo nano /etc/network/interfaces
ctrl + o
cntrl + x
Should I insert the lines at the end?
just before of Fake NIC.
Hi, received the following error:
did you restart the Erle-Brain after applied the changes?
Hi, yes I didyesyes .
could you please, flash again your SD card?
With which code? I have an Erle-Brain2
Can you please send me code for the Ele-Brain2 that is verified by your company?This is really taking too long...
Not sure what you are saying. Download the image from the Erle website, and follow the directions to reimage.
download this deb package: https://mega.nz/#!xpIXAK6I!JMSP_Ygjksc7Pc4ccpPEgE6DREnjjoxhGXJMbZwMh0o
Then, copy it in your Erle-Brain, and install it using:
sudo dpkg -i apm-copter-erlebrain_1.0_armhf.deb
What do you mean "copy it in your Erle"?Is this an image file?Should I flash it to the SD card?
It's just a file (not an image), just copy it to your EB3. I generally use scp to copy files.